Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.
ATLONA - AT-UHD-EX-100CEA-KIT

ATLONA - AT-UHD-EX-100CEA-KIT

ATLONA - AT-UHD-EX-100CE-RX-PSE

ATLONA - AT-UHD-EX-100CE-RX-PSE

ATLONA - AT-UHD-EX-100CE-TX-PD

Troxell SKU
AON AONATUHDEX100CP
$264.71

ATLONA - AT-UHD-EX-100CE-TX-PD

ATLONA HDMI TRANSMITTER W ETHERNET, CONTROL AND PoE

  • 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
  • HDCP 2.2 compliant
  • Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
  • HDBaseTTM transmitter for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
  • Remotely powered via PoE (Power over Ethernet)
  • Transmits RS-232, CEC, and Ethernet control signals over HDBaseT
  • Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

ATLONA - AT-UHD-EX-100CE-TX-PD

ATLONA HDMI TRANSMITTER W ETHERNET, CONTROL AND PoE

The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass-through and RS-232 control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-TX-PD is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This device is externally powered via Power over Ethernet, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, including the AT-UHD-CLSO-612ED, AT-UHD-CLSO-840, and AT-UHD-SW-5000ED.

The AT-UHD-EX-100CE-TX-PD transmitter simplifies system design when powered by an Atlona switcher with HDBaseT inputs, reducing cost and complexity by eliminating the need for a power supply. It can also be paired with the AT-UHD-EX-100CE-RX-PSE receiver and AT-HDVS-200-RX scaling receiver, both delivering PoE. Installer-friendly features include a rack-mountable form factor that allows four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.


Applications:

This transmitter is ideal for use in applications where:

  • HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table
  • 4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design

Features:

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

Supports 4K HDR10 @ 24 Hz

  • Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Remotely powered via PoE (Power over Ethernet)

  • IEEE 802.3af PoE Powered Device (PD)
  • Power for transmitter is supplied by receiver over HDBaseT
  • Saves time and integration costs

AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display

Extended distance HDMI extension

  • Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

Extends RS-232, CEC, and Ethernet control signals*

  • Control signals travel over HDBaseT link to device for maximum control system flexibility
  • Simplifies integration of source, control system, and display
  • * The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.

Rear panel I/O connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

Multi-channel audio compliant

  • Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system

Field-updatable firmware

  • Front panel USB port provides an easy means for device updates
  • Ensures long-term system return on investment

Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

Low-profile, 1 inch (25 mm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces
  • Keeps devices out-of-sight when placed in public spaces

Included accessories

  • User guide, mounting brackets

Award-winning 10 year limited product warranty

  • Ensures long-term product reliability and performance in residential and commercial systems
  • Specify, purchase, and install with confidence

 


 

 

Specifications

Resolution  
Video: 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA: 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace: YCbCr, RGB
Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
Color Depth: 8-bit, 10-bit, 12-bit
HDR: 4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color
  (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)
Audio  
Formats: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate: up to 24-bit
Distance  
CAT5e/6 @ 4K: up to 70 meters
CAT6a/7 @ 4K: up to 100 meters
CAT5e/6 @ 1080p: up to 100 meters
HDMI IN/OUT @ 4K: up to 5 meters
HDMI IN/OUT @ 1080p: up to 10 meters
Signal  
Bandwidth: 10.2 Gbps
CEC: Pass through
HDCP: Supports up to 2.2
Temperature  
Operating: 0°C to 50°C
Storage: -20°C to 60°C
Humidity: 20 to 90% non-condensing
Power  
Consumption: 15.2W (when paired with RX)
Supply: Input: AC100~240V 50/60Hz
  Output: DC 48V/0.83A
Dimension  
H x W x D: 25 x 109 x 127 (mm)
w/ears: 27 x 119 x 127 (mm)
Weight  
Unit: 0.39kg
Certification  
Power Supply: CE, FCC, RoHS, cULus, RCM, CCC
Product: CE, FCCAA1:B38
More Information
Brand Atlona
Model Number AT-UHD-EX-100CE-TX-P
Troxell SKU AON AONATUHDEX100CP
Replacement SKU N/A
Discontinued No
Accessory Type Receiver
Dimensions WxDxH N/A
Product Weight N/A
Warranty N/A
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account